New Z925M EFI ZTrak™ Zero-Turn Mower

Specifications

Compare >>> Select up to 2 models to compare specifications

John DeereZ925M EFI ZTrak™ Zero-Turn Mower

Add Model --Please Select-- Z915E (Model year 2019) Z920M (Model year 2019) Z930M (Model year 2019) Z930R (Model year 2019) Z945M (Model year 2019) Z950M (Model year 2019) Z950R (Model year 2019) Z955M (Model year 2019) Z960M (Model year 2019) Z970R (Model year 2019) Gravely Pro-Turn 260 EFI (992281) Pro Z 960L KW Lazer Z X-Series EFI LZX740EKC526W0 Lazer Z X-Series LZX801CKA606C1 Super Z 824 EFI Z Master 3000 74958 EFI Z Master 5000 EFI (74904)

Add Model --Please Select-- Z915E (Model year 2019) Z920M (Model year 2019) Z930M (Model year 2019) Z930R (Model year 2019) Z945M (Model year 2019) Z950M (Model year 2019) Z950R (Model year 2019) Z955M (Model year 2019) Z960M (Model year 2019) Z970R (Model year 2019) Gravely Pro-Turn 260 EFI (992281) Pro Z 960L KW Lazer Z X-Series EFI LZX740EKC526W0 Lazer Z X-Series LZX801CKA606C1 Super Z 824 EFI Z Master 3000 74958 EFI Z Master 5000 EFI (74904)

Engine Manufacturer/model	ECV740
Engine Power	Gross at 3,600 rpm: 25 hp 18.6 kW
Fuel tank capacity	11.5 U.S. gal. 43.5 L
Mower deck Size	54, 60 in. 137, 152 cm
Blade tip speed	Approximately 18,000 fpm 5,486 m/min
Transmission	Hydrostatic
Speed range	0-10 mph 0-16.1 km/h
Drive wheels	24x12-12 (54 in., 60 in.)
Caster wheels	13x6.5-6
Warranty	36 months or 1200 hours, whichever comes first First 24 months, no hour limitation

Manufacturer/Model	ECV740
Power	Gross at 3,600 rpm, 25 hp 18.6 kW
Displacement	45.6 cu in. 747 cc
Cylinders	Two
Crankcase capacity	With filter, 2 U.S. qt 1.9 L
Oil filter	Full flow, replaceable
Lubrication	Full pressure
Cooling	Air
Air cleaner	Pre-cleaner Yes Heavy-duty canister type with safety element

Fuel type	Gasoline
Fuel consumption	Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal. 4.2-7.2 L/hr
Fuel tank capacity	11.5 U.S. gal. 43.5 L
Fuel tank switch/shut-off valve	Yes

Charge system	20 amp
Battery voltage	12 V
Cold cranking amp	300 amp
Hour meter	Standard, digital
Operator presence starting system	Brake-N-Go (hand)

Transmission	Hydrostatic
Hydraulic pumps
Wheel motors	Tuff Torq heavy-duty integrated piston wheel motor
Travel speed	Speed range 0-10 mph 0-16.1 km/h Forward 0-10 mph 0-16.1 km/h Reverse 0-4.5 mph 0-7.2 km/h
Speed and direction control	Twin levers
Hydraulic capacity	5.9 U.S. qt 5.6 L
Filter	Internal, replaceable
Hydraulic oil cooler

Warranty	36 months or 1200 hours, whichever comes first First 24 months, no hour limitation

Drive wheels	24x12-12 (54 in., 60 in.)
Rear tires
Load rating	4 PR

Dynamic braking	Twin levers
Park brake	Internal wet disk integrated in the transmission
Park brake actuation	Hand brake

Type	Electro-magnetic, 225 lb-ft 305 Nm
Drive	V-belt

Size	54, 60 in. 137, 152 cm
Deck construction	7-Iron PRO, one-piece stamped steel with reinforcements
Deck thickness	7 gauge 0.18 in. 4.6 mm
Discharge	Side, Mulch On Demand™ system
Height-of-cut range	Increments 0.25 in. 0.64 cm 1-5.5 in. 2.54-14 cm
Cutting width	54, 60 in. 137, 152 cm

Length	Varies by deck size
Thickness	0.25 in. 0.64 cm
Blade tip speed	Approximately 18,000 fpm 5,486 m/min
Number	Three

Caster wheel type	Flat free
Caster wheels	13x6.5-6
Front anti-scalp rollers	RH, center, LH
Rear anti-scalp rollers	Optional

Length	84 in. 213 cm
Width	With chute down, 68, 74 in. 173, 188 cm
Height	With ROPS up, 73 in. 185 cm With ROPS down, 47 in. 119 cm
Weight	1,198 to 1,291 lb 543 to 586 kg

Date collected	11-Sep-2018