John Deere
CC13 Coulter Chisel
Farm Equipment
Equipment Description
- 13 standards
- Autonomy Ready in-base
- TruSet™ Active in-base
- Tackle varying crop conditions with minimal operator input
| Key Specs - Working width | 4.95 m 16 ft, 3 in. |
|---|---|
| Key Specs - Maximum transport width | 5.7 m 18 ft, 10 in. |
| Key Specs - Miles per hour | 9.6-11.3 km/h 6-7 mph |
| Key Specs - Horsepower per foot | 48.95 to 61.2 kW/m 20 to 25 hp/ft |
| Key Specs - Standard spacings | 38.1 cm 15 in. |
Featured Content
Fall Tillage fasterChisel 7″ deep at 7 mph with the CC21 and finish up to 50 more acres a day*.
The CC Series gives you the ability to work wider and faster. By putting the CC Series in the field for primary tillage, you can finish faster and tackle whatever challenge is next.
*Calculation assumes going from an 11 shank 2730 (22 ft working width) at 6.2mph to a CC21 (26.25 ft working width) at 7 mph.
Any operator anytimeEasy to adjust, if you need to. The CC Series tackles varying crop conditions with minimal operator input or adjustments. When adjustments do need to be made, TruSet™ allows you to make changes with the push of a button, maximizing acres covered per day.
Tech for the future. NowThe simplicity and uptime of the CC Series makes every model an ideal primary tillage tool to run autonomously. With little to no adjustment needed as conditions change, you can have peace of mind knowing the CC Series is getting work done.
Maximize your tractor with the CC SeriesCompatible with a wide range of tractors.
The wide range of sizes offered in the CC Series allows you to better pair your primary tillage tool to tractors already around the farm. Whether it’s a new tractor or one that has been on the farm for years, there is a CC Series model for your operation.
Offers & Discounts
No matching offers found for "CC13 Coulter Chisel".